When you take your car in for a safety inspection, there are several standard tests that a mechanic will put your car through in order make sure that your vehicle meets the necessary safety guidelines mandated by the State or Country that you live in.
In The United Kingdom, there is an annual M.O.T. (Motor Ordinance Test). This is required by law and is designed to keep all vehicles operating within a very high safety level. One may feel that this test is too strict.
In the United States of America, vehicles are NOT subject to an annual inspection, however, when a vehicle is sold to a second hand party, that vehicle has to be put through a test known as a 'Sate Inspection'.
Basically, the inspections are similar in both countries.
The safety requirements for the State Inspection in the US are listed below.
A vehicle must have good tires! All tires must be the same size and with sufficient tread, including the spare. Bald spots, exposed wire and irregular wear, are definitely not acceptable. On the side of each tire is an indicator level and if the tires are worn below that point, then the tire has to be replaced.
Your windshield must be free of any cracks or chips. Just one blemish may cause your vehicle to fail the test and you will have to have the windshield replaced!
Brakes may be tested on a treadmill. If your vehicle cannot withhold the standard pressure applied by the treadmill, then it will fail. Wheels are removed and the Drums, Rotors and brake pads will be checked for ware and tear. Brake hoses must be free of leaks.
Your steering capabilities will be checked for safety! If there is any movement in the front end or steering mechanism, your vehicle may have worn connecting rods or ball joints that will inevitably relate to critical consequences in the near future. The need for a simple alignment adjustment may be over looked." [Read more]
No comments:
Post a Comment